KEY HEAD SPECS
FOR FULL SPECS AND SET UP GUIDES CLICK HERE
LIBRA SPECS
Libra mount suspended Specification.
Height: 76cm; Width: 51cm; Depth: 21cm
Weight : 27Kg ( no isodamp ) 31Kg ( with isodamp )
Fits standard Mitchell / Moy fitting e.g. three way leveller; bazooka.
Pan : 350 degrees, Tilt : 270 degrees.Max Pan & Tilt speeds : 300 degrees/sec. Roll : 30 degrees either side of horizion.
Sealed for wet / harsh environments. Temp range: -20 degrees C to + 45 degrees C. For temps less than -10 please call as Libra has been re-greased/tested at lower temps but is not standard
Max camera package:150lb.
Libra Mount upright Specification.
Height : 61cm; Width : 51cm; Depth : 21cm
Weight : 27Kg ( no isodamp ) 31Kg ( with isodamp )
Fits standard Mitchell / Moy fitting e.g. three way leveller; bazooka.
Pan : 350 degrees, Tilt : 270 degrees.Max Pan & Tilt speeds : 300 degrees/sec. Roll : 30 degrees either side of horizion.
Sealed for wet / harsh environments. Temp range: -20 degrees C to + 45 degrees C. For temps less than -10 please call as Libra has been re-greased/tested at lower temps but is not standard
Max camera package:150lb.
MEGA SPECS
Height : 88cm (34.5 in ) Weight : 35 Kgs
Width : 78 cm ( 33.5 in ) Fitting : Mitchel / Moy
Depth : ( 8.25 in ) Pan, tilt & roll 360 deg. continuous
Weight : 35 Kgs
Fitting : Mitchel / Moy
Pan, tilt & roll 360 deg. continuous
3D RIGS
FOR FULL EQUIPMENT INVENTORY, SPECS AND SET UP GUIDES CLICK HERE
AMPHIBIAN SPECS
Axis Height 4'1" 1.2 m
Axis Width 2'4" 74 cm
Axis Weight 80 lb 36.3 kg
Axis Payload Capacity 90 lb 40.8 kg
Axis Height 3'6" 11 cm
Axis Width 1'9" 53 cm
Axis Weight 65 lb 29.5 kg
Axis Payload Capacity 90 lb 40.8 kg
G3 STABALIZED SPECS
This head accommodates 2 35mm Cameras
Axis Height (min configuration) 2'6" 84 cm
Axis Width (min configuration) 1'9" 56 cm
Axis Depth (min configuration) 3' 91 cm
Axis Weight 70 lb 31.8 kg
Axis Payload Capacity 150 lb 68.1 kg
Pan, Tilt and Roll 0-180 degree per sec
Mounting Base Standard Mitchell
PEEPOD 500 SPECS
Weight Of Universal Gearbox (each) 4lbs (1.8 kg)
Speed Range 2 seconds to 24 hours
Maximum recommended Camera Payload 60 lbs (27kg)
Gearbox Water resistance IP 64
Power to Head 28 V DC (Average 1.2 amps)
Control Data to Head RS 232
PEEPOD 1600 SPECS
Height: 27 inches (685mm)
Width: 20 inches (508mm)
Depth: 7 inches (178mm)
Weight: 38lbs (17.3 kgs)
Max recommended balanced load: 60lbs (27.3 kgs)
Pan & Tilt movement: 360 degrees continuous
Speed Range Pan & Tilt: 2 seconds to 24 hours
Power to Head: 28 volts DC (Average 4 amps)
Number of slip-rings: 28 (Pan & Tilt)
Outputs at Camera Plate: BNC 75 Ohm (2 Channels)
Triax 50 Ohm
28 volts @ 12 amps peak
12 volts @ 12 amps peak
Zoom (for video lens control)
Focus (for video lens control)
Zoom (to drive Preston Motor)
Focus (to drive Preston Motor)
Iris (to drive Preston Motor)
Camera Start/Stop
Outputs Spare for client's use: Aux 1 two channels 8 amps max
Aux 2 eight channels 2 amps max
Mounting Base: Standard Mitchel
PEEPOD 2000 SPECS
Weight of two axis format: 70 Ibs (32 kgs)
Weight of three axis format: 125 Ibs (56 kgs)
Max recommended load: Two axis 200 Ibs (90 kgs)
Three axis 150 Ibs (68 kgs)
Pan, Tilt and Roll movement: 360 Degrees continuous
Electronic limit switches: Tilt and Roll
Speed Range Pan, Tilt and Roll: 2.5 seconds to 37 hours
Number of slip-rings: 30
Outputs at Camera Plate: BNC 75 Ohm (x 3)
Triax
12 volts @ 2 amps for Video (x2)
12 volts @ 10 amps peak (x2)
24(28) volts @ 15 amps peak
Zoom output
Focus output
Iris output
Camera Start/Stop
Outputs spare for clients' use: Aux 1 two channels 8 amps
Aux 2 eight channels 2 amps
Mounting Base: Standard Mitchel
Link between Head and Controls: RS232 9600 bps
Supply voltage range: 21 to 34 volt DC
Over/under voltage cut off: 18 and 37 volt DC
Power for Head @ 28 volts: 1.7 amps to 10 amps peak
PEEPOD CLASSIC SPECS
POWER-POD Mk VWeight (without accessories): 40lbs (18 Kgs)
Weight with 150mm Riser: Add 2.5lbs (1.1 Kgs)
Weight with 300mm Riser: Add 5lbs (2.2 Kgs)
PAN: 360 Degrees continuous
TILT: 360 Degrees continuous (except in low profile central mode)
Speed Range PAN & TILT: 3 secs to 16 mins approx.
Maximum recommended balanced load: 80lbs (36.3 Kgs)
No. of Slip rings: 8
Mounting Base: Standard Mitchel
Electronic Control Module
Weight: 19lbs (8.6 Kgs)
Mains Power Supply: AC 220 or 110 Volts
Batteries: 2 x 24 or 30 Volts
Maximum current required by Head: 6 amps per Axis
Average current per Axis: 1.5 amps
General: Full diode protection on battery inputs
Current limiting
Thermal overload protection
Mains or batteries logic circuit
Worrell Type Handle Boxes
Weight: 20lbs (9 Kgs)
Zapper
Batteries: 4 x 9 Volt PP3
SLPOD
A small and lightweight 2-axis remote head. The SL Pod boasts a rigid, adjustable frame, powerful motors, repeatability, soft stops and wireless operation. It can quickly change from upright to under slung modes and accommodate most lightweight cameras. Available with Worrall wheels or joystick controls.
Specs:
Approx. 20lbs.
Small upright
15"x 15"x 7"
Small under slung
15"x 15"x 7"